The documentation on CCO is a bit confusing over the memory configuration for the 837 ADSL router. It originally shipped with 32MB, this increased somewhere along the way to a default of 48MB. What wasn't explained was whether the 48MB was board and the DIMM slot was still free? Does anyone know?
There is also conflicting documentation about what the maximum DRAM memory configuration is? I have read the maximum is 48MB, I have also read the maximum is 80MB.
I have an 837 that only has 32MB on the motherboard, it also has a 16MB DIMM taking it to 48MB. I would like to increase this as the current IOS requires 64MB. What are my options? some part numbers (or equivilents) would be nice.
The versions of the 837 that shipped with 48Mb of DRAM had 48 Mb of onboard DRAM. On those versions, the DRAM slot is free for upgrade purposes..
The current versions of the 837 are shipping with 64Mb of DRAM.
The maximum sized DRAM memory card you can use on a 837 is 16Mb. Therefore, depending on whether you bought the 32Mb, 48Mb or the 64Mb version of the box, the max memory is 48Mb, 64Mb or 80Mb, respectively.
So to conclude, you will not be able to upgrade the DRAM on your router to anything more than 48Mb ...
What options do I have for getting some more memory then? I replaced a 1720 with WIC-1ADSL for the 837 as I needed some features in 12.3T that aren't available in mainline 12.3. Are there any options to get the 837 replaced by Cisco for a 64MB unit?
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...