Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

837 dmz and IP Unumbered

How do enable the 837 box to provide a dmz and use that interface for the IP of the dialer0 (ip unumbered)? then configure the other (ethernet0) interface with a private ip address for the internal network. Through the SDM web interface the dmz configuration option is available. I just cannot find out how to enable this feature through the command line interface. any help would be appreciated.

Rgds,

joel-metz

2 REPLIES
Bronze

Re: 837 dmz and IP Unumbered

Refer to the document on Understanding and Configuring the ip unnumbered Command

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8d.shtml

New Member

Re: 837 dmz and IP Unumbered

Thanks for your help. I understand IP Unumbered, what I need help with is configuring a Cisco 837 with a DMZ and mapping the public IP provided by the ISP to that interface hence using IP Unumbered for the dialer interface. More clarifications and questions are welcome.

Regards,

joel-metz

245
Views
0
Helpful
2
Replies
CreatePlease login to create content