ACS v2.3 External Database Windows NT group fetch failure
We have an ACS v2.3 server running on a member server of an NT4 domain called RAS01 (OK I know we should upgrade...). At present a number groups from a number of NT4, Win2000 AD and one Win2003 (call it inter.rail.co.za) are configured on the server. When I now try to add groups from a new win2003 domain (call it inter.workshop.co.za (netbios name = WRKSHOP of which inter.rail.co.za is the forest root)) the group fetch fails so I cannot add groups from this domain to the ACS external Windows NT database. There is a two way trust between the NT4 RAS01 domain and inter.workshop.co.za and thus inter.workshop.co.za groups can be given access to RAS01 resources. In an attempt to enable ACS to "see" inter.workshop.co.za I also added lmhosts records of the form :
x.x.x.x PDCemulator #PRE #DOM:WRKSHOP
x.x.x.x "WRKSHOP \0x1b" #PRE
Are these required and if so how important is the spacing - I have some tabs (but not between the "s). However they seem to make no difference.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...