Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

add SSL VPN to existing site-site vpn?


I got a point-point connection bet both ASA 5505 (office A & office B) that's working quite well. Now I wanted to access thru vpn from my house so that I can connect to my office network. I want to add a config that will not affect the existing just a newbie...

Can anyone help me with step by step procedure? or a sample config?

I hope to use SSL VPN Client 1.1.3 & dynamic DSL at home.



here's my config:


interface Vlan1

nameif inside

security-level 100

ip address


interface Vlan11

nameif outside

security-level 0

ip address x.x.x.x


interface Ethernet0/0

switchport access vlan 11


interface Ethernet0/1


interface Ethernet0/2


interface Ethernet0/3


interface Ethernet0/4


interface Ethernet0/5


interface Ethernet0/6


interface Ethernet0/7


passwd xxx

ftp mode passive

dns server-group DefaultDNS


access-list 101 extended permit ip any

access-list 102 extended permit ip any

access-list 111 extended permit ip host host y.y.y.y

pager lines 24

mtu inside 1500

mtu outside 1500

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-522.bin

no asdm history enable

arp timeout 14400

access-group 111 in interface outside

route outside y.y.y.y 1

route outside y.y.y.y 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout uauth 0:05:00 absolute

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

crypto map outside_map 20 match address 102

crypto map outside_map 20 set peer x.x.x.x

crypto map outside_map 20 set transform-set ESP-3DES-SHA

crypto map outside_map interface outside

crypto isakmp enable outside

crypto isakmp policy 10

authentication pre-share

encryption 3des

hash sha

group 2

lifetime 86400

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group x.x.x.x ipsec-attributes

pre-shared-key *

telnet timeout 5

ssh timeout 5

console timeout 0

management-access inside


Re: add SSL VPN to existing site-site vpn?


Do you have ASDM installed?

If yes, Follow this steps:


Dharmesh Purohit

Community Member

Re: add SSL VPN to existing site-site vpn?

Thanks for the help.

Do you think i will not affect my existing config? it's a live config...


CreatePlease to create content