03-06-2007 04:59 AM
Dear All
i am having a problem with an adsl connection when i try to use WIC-ADSL on 1841 router. The isp is using routed bridge encapsulation. with a static ip. i configured the the atm connection as follows
int atm0/0/0.1
pvc
8/35
atm routed-bridge ip
Created a static route to the gateway of the isp
i am able to ping the gateway but unable to ping any other website from the router nor from the users. can any one please help me with this problem
regards
aamir
03-06-2007 05:15 AM
Here is a configuration example for RBE:
http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e5f.shtml
03-06-2007 09:10 AM
just wanted to inform that i have already added the ip address (static) provided by the ISP. i want to use this atm connection to route internet traffice to the ethernet interface.
Thanks
03-13-2007 01:44 PM
Hi MUHAMMAD,
This seems to be an ISP issue since you can reach their network (gateway) but not further. Also, you can try configuring IRB as follows:
bridge irb
!
interface ATM0.1 point-to-point
bridge-group 1
pvc 0/35
encapsulation aal5snap
!
!
interface BVI1
ip address
!
ip route 0.0.0.0 0.0.0.0
!
bridge 1 protocol ieee
bridge 1 route ip
Let me know if it works!
Juan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: