Hi all. I have a 1750 router running IOS 12.1(3)XT2.
I need to allow at least 2 concurrent analog connections to connect and pass the information to a radius server. I have the part about the radius server figured out, but I need to know if anyone has been able to get a WIC-2AM to work for this scenario.
I have made it work with external modems but not with the AM modules but i think it can. You can configure each async interface and test to make sure you can connect and pass traffic. If you want them to look like one interface you will then have to configure a multilink interface and put both of the async interfaces in it.
Here is a doc that shows how to do Async Multilink PPP.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...