Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Allow VPN client to connect from the inside to another remote network

Hi, if I have a Cisco VPN client software on the inside of network and client is to connect to a remote network, over the internet. What ports need to be opened and on the outside interface/inside/both?

Thanks.

1 REPLY

Re: Allow VPN client to connect from the inside to another remot

Basically, all you need is UDP port 500, NAT-T will do the rest.

Connections are initiated from the inside and while everything is allowed in that direction, this should work by default.

If you have an access-list that limits traffic from inside to outside, you might need to allow this traffic.

Regards,

Leo

291
Views
3
Helpful
1
Replies
CreatePlease to create content