Re: allowing Telnet access from specific IP w/ PIX 515E
OK then SSH is an option. Now let me elaborate further.
We have 2 networks in place. 1 uses the Cisco router/PIX firewall with a T-1 line. The other uses a Watchguard firewall with a cable modem. Now, both the PIX and Watchguard have an internal IP of 131.107.x.x. The networks are kept separated by separate switches. The T-1/Ciscos are used for traffic to our web sites. The Watchguard/cable modem are for our internal users for web access and email.
Now, currently our external users in the warehouse use the cable more/Watchguard IP to access our network. We'd like to use the T-1/Cisco network as a backup since the cable modem goes down from time to time.
So can we create a route and/or ACL using the external IP of the PIX? I am checking with our IBM AIX support team about adding a static route to the box (that we use to Telnet/SSH into) to also add the external IP as a route, if it's even possible.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.