Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Anyconnect and Cisco VPN client

I have a 5520 ASA

Can I have some users run AnyConnect and

others run the vpn client?

Cisco says this

"The Cisco AnyConnect VPN Client can coexist with the IPSec Cisco VPN Client, but they cannot be used simultaneously."

Im wondering if this is on the user or ASA.

Also.I have the anyconnect vpn client

on my desktop..is this the same that

I load on the ASA???

I would see no reason to do this..but

all documentation tells me i need to

3 REPLIES

Re: Anyconnect and Cisco VPN client

The ASA can run the AnyConnect VPN client and VPN client. What the documenation implies is that a remote user cannot run both application at the same time. They connect using the VPN Client or the AnyConnect Client.

HTH>

Cisco Employee

Re: Anyconnect and Cisco VPN client

The ASA has to have the PKG file loaded before it will accept AnyConnect connections. Even if the client is already installed on the desktop. Yes both Cisco VPN Client and AnyConnect can be installed on the desktop however establishing a connection concurrently with both product will not work.

New Member

Re: Anyconnect and Cisco VPN client

You can use VPN client and anyconnect for different users. You can even set groups for each that you can filter to allow what protocol you want to open. Just to let you know that any connect uses ssl and depending on your license, IPsec has more concurrent users than SSL anyconnect. Keep this in mind especially if you are also using the WebVPN.

412
Views
0
Helpful
3
Replies