When you input the wrong config register value you changed the speed of the console port. You can recover from this by changing the speed in your terminal emulator (Hyperterm or whatever you use). I suggest that you try all the speeds, starting at 1200, 2400, 4800. In some terminal emulators (especially Hyperterm) you may need to stop the emulator and start the emulator each time that you change speeds.
When you find the speed that works, you will be able to set the config register to 0x2142. At that point you will need to return your terminal emulator to 9600 as the speed.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...