Pls, how can I discover which license I have on AS 5350 through CLI. Here is my sh ver:
xxxx#sh ver Cisco Internetwork Operating System Software IOS (tm) 5350 Software (C5350-IS-M), Version 12.2(2)XB3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Sun 10-Feb-02 00:31 by hwcheng Image text-base: 0x600089C8, data-base: 0x61180000
ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1) BOOTLDR: 5350 Software (C5350-BOOT-M), Experimental Version 12.1(20000922:142008) [nag-flo_t_0110 101]
xxxx uptime is 2 days, 3 hours, 2 minutes System returned to ROM by power-on System restarted at 09:35:52 utc Wed Feb 24 2010 System image file is "flash:c5350-is-mz.122-2.XB3.bin"
cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory. Processor board ID JAE070206Y0 R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache Last reset from power-on Channelized E1, Version 1.0. Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). Primary Rate ISDN software, Version 1.1. Manufacture Cookie Info: EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32, Board Hardware Version 3.33, Item Number 800-5171-02, Board Revision B0, Serial Number JAE070206Y0, PLD/ISP Version 2.2, Manufacture Date 7-Jan-2003. Processor 0x14, MAC Address 0x0B46825FEA Backplane HW Revision 1.0, Flash Type 5V 2 FastEthernet/IEEE 802.3 interface(s) 64 Serial network interface(s) 60 terminal line(s) 2 Channelized E1/PRI port(s) 512K bytes of non-volatile configuration memory. 32768K bytes of processor board System flash (Read/Write) 8192K bytes of processor board Boot flash (Read/Write)
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...