Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

AS5350XM Power Supplies!!

hi,

I have a RAS (Model:AS5350XM) with two power supplies.I need to prove to the Customer that the power suplies are working in LOAD-SHARING MODE. Can some one have command sets or some Data Sheet proof depicting the load sharing behaviour of RAS power supplies?

1 REPLY
Silver

Re: AS5350XM Power Supplies!!

The power system consists of a single input AC or DC power supply or a dual input (redundant) AC or DC power supply. Cooling is provided by two self-contained fans. Each power module is capable of supplying a maximum DC load of 150 watts, and is composed of four independent output voltages: 3.3V, 5V, 12V, and -12V. AC input units have power factor correction, and low total harmonic distortion. Power failures are reported through environmental monitoring software. MGX-AC1-1 is for systems requiring a single AC power supply that is powered from a single AC power source. MGX-AC1-1 provides up to 1200 W of load-shared redundant power. If additional power is needed, additional power supplies, providing an additional 1200 W each, can be added

http://www.cisco.com/en/US/docs/routers/access/as5350xm/hardware/installation/guide/55chovr.html#wpxref94290

205
Views
0
Helpful
1
Replies