I want to know what is the difference in the above two cards. Is there any hardware changed? I understand DFC card still works in XM chassis but do not know how to distinguish one to other. Any comparable chart or spreadsheet in features and performance posted; url would help. Thanks.
Both are universal port. Universal port means it can do dial and voice together. My question is why parts number changed. I can populate AS54-DFC-108NP in XM chassis with no problem. But I am not sure whether I can mix both DFC and VUFC in the same XM chassis. I found some limitation and restriction at web but didn't specify whether I can mix together and what would be the ultimate result. There is no Q&A specify on this product line.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...