Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ASA 5510 VPN License Issue

From what I understand you can only run AnyConnect with IPSec if you're doing IKEv2, is this correct? Also, according to my license, I can

have up to 250 VPN peers, does that mean AnyConnect IPSec peers, or do I have to use the old Cisco VPN Client, unless I upgrade to a AnyConnect essential or premium license?                  

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

ASA 5510 VPN License Issue

Yes, you are correct. IKEv2 is only support with AnyConnect client, and IPSec LAN-to-LAN.

When running AnyConnect IPSec, you would need to have either the AnyConnect Essential or AnyConnect Premium license.

The up to 250 VPN peers is for the legacy IPSec VPN Client and LAN-to-LAN IPSec tunnels.

And lastly, you can't use IPSec VPN Client with IKEv2, you can however continue to use IKEv1 with IPSec VPN Client, and yes you would have up to 250 VPN peers.

1 REPLY
Super Bronze

ASA 5510 VPN License Issue

Yes, you are correct. IKEv2 is only support with AnyConnect client, and IPSec LAN-to-LAN.

When running AnyConnect IPSec, you would need to have either the AnyConnect Essential or AnyConnect Premium license.

The up to 250 VPN peers is for the legacy IPSec VPN Client and LAN-to-LAN IPSec tunnels.

And lastly, you can't use IPSec VPN Client with IKEv2, you can however continue to use IKEv1 with IPSec VPN Client, and yes you would have up to 250 VPN peers.

540
Views
0
Helpful
1
Replies