Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Async TTY connection

I need to broadcast a async stream of data (at 19.2kbps 8 bits no parity) from central site to multiple sites at remote. Is there an async multicast feature in the Cisco 38xx and 28xx routers that I can use ?

Appreciate suggestions and ideas.

Thank you.

HC

5 REPLIES
Silver

Re: Async TTY connection

Async is not a protocol that you can send down a router. It has no ability for addressing. What do you want to do with Async? What are you trying to do. Maybe there is another method or protocol you can use....

Community Member

Re: Async TTY connection

the central site has an async stream of information (in serial interface) to be broadcast/multicast to multiple remote sites simultaneously over MPLS network. The transmission is only one way from central to remote sites.

I understand async BSTUN is available, but is it only for point to point only ?

Silver

Re: Async TTY connection

You may want to take a look at the below URL:

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801dbe33.shtml

It is an example for tunneling Async protocol trough IP. You may have luck with this....

Community Member

Re: Async TTY connection

Let me try out.

Thanks.

Community Member

Re: Async TTY connection

for Async data, the BSTUN does not support point-to-multipoint broadcast application, is there another alternative ?

Please advise.

Thank you.

315
Views
0
Helpful
5
Replies
CreatePlease to create content