Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Changing RADIUS Server

We have an AS5300 and a Radius server. We are changing the Radius server. Besides changing the IP address of the Radius server on the AS5300, is there anything else that we need to do? Thanks.

1 REPLY

Re: Changing RADIUS Server

I dont think so, just specify the new IP and you are good to go.

check the following example:

aaa authentication login default group radius local

aaa authorization exec default group radius local

aaa authorization command 2 default group tacacs+ if-authenticated

radius-server host 172.16.71.146 auth-port 1645 acct-port 1646

radius-server attribute 44 include-in-access-req

radius-server attribute 8 include-in-access-req

So, unless you are changing port or other parameters, changing the IP will do the job.

HTH,

please rate all posts.

Vlad

133
Views
5
Helpful
1
Replies
CreatePlease to create content