Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 2811 PVDM 32

Hi guys

I am currently trying to configure a 2811 with a PVDM2-36DM and a HWIC-1CE1T1-PRI to allow remote users to dial in using both ISDN and pstn modem access. Is this possible using this combination of WICS?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Cisco 2811 PVDM 32

You do not have "ppp authentication eap" in dialer like you do in group-async.

8 REPLIES
Hall of Fame Super Gold

Re: Cisco 2811 PVDM 32

Yes, it should be possible.

New Member

Re: Cisco 2811 PVDM 32

this is the config we are running. we can dial a Windows XP machine in using PSTN no problem, however ISDN will authenticate the link, and then can't negotiate a PPP link

this is the config we are applying

version 12.4

no service pad

service tcp-keepalives-in

service tcp-keepalives-out

service timestamps debug datetime msec

service timestamps log datetime msec show-timezone

service password-encryption

!

hostname xxx

!

boot-start-marker

boot-end-marker

!

card type e1 0 0

logging buffered 4096 informational

enable secret xxxxxx

!

aaa new-model

!

!

aaa authentication login default local

aaa authentication login console local

aaa authentication ppp default group radius

!

!

aaa session-id common

clock timezone GMT 0

clock summer-time GMT recurring

network-clock-participate wic 0

network-clock-select 1 E1 0/0/0

!

modem call-record terse

modem country v12 e1-default

modem recovery threshold 10

no ip source-route

!

!

ip cef

no ip dhcp use vrf connected

ip dhcp bootp ignore

!

ip dhcp pool dialinusers

network xxxxx xxxxxx

default-router xxxxx

dns-server xxxxxxx xxxx

!

!

no ip domain lookup

multilink bundle-name authenticated

isdn switch-type primary-net5

isdn voice-call-failure 0

!

!

!

!

!

username xxxxxx password xxxxxx

archive

log config

logging enable

logging size 200

hidekeys

path flash:archeived-config

maximum 14

write-memory

time-period 1440

!

!

controller E1 0/0/0

pri-group timeslots 1-31

!

!

!

!

interface FastEthernet0/0

description "xxxxxx"

ip address xxxx xxxxxx

no ip redirects

duplex auto

speed auto

no cdp enable

!

interface FastEthernet0/1

description "xxxxxx"

ip address xxxxx xxxxxx

no ip redirects

duplex auto

speed auto

no cdp enable

!

interface Serial0/0/0:15

description "D Channel interface for the Primary Rate ISDN"

no ip address

encapsulation ppp

ip mroute-cache

dialer rotary-group 1

dialer-group 1

isdn switch-type primary-net5

isdn incoming-voice modem

no fair-queue

no cdp enable

!

interface Dialer1

no ip address

encapsulation ppp

dialer in-band

dialer idle-timeout 2147482

dialer-group 1

no peer default ip address

no fair-queue

no cdp enable

ppp multilink

!

interface Group-Async1

description "Global Interface for PRI Dial-In Connections"

ip unnumbered FastEthernet0/0

encapsulation ppp

dialer in-band

dialer idle-timeout 0

async mode interactive

peer default ip address dhcp-pool dialinusers

no fair-queue

ppp authentication eap

no ppp chap wait

ppp multilink

group-range 0/386 0/421

!

ip route xxxx xxxx FastEthernet0/0

ip route 1xxxx xxxx FastEthernet0/0

ip route 1xxx xxx FastEthernet0/1

!

!

no ip http server

no ip http secure-server

!

dialer-list 1 protocol ip permit

no cdp run

!

radius-server host xxxxx auth-port 1645 acct-port 1646

radius-server timeout 10

radius-server key xxxxxx

!

control-plane

line con 0

login authentication local

line aux 0

exec-timeout 0 1

no exec

transport output none

line 0/386 0/421

login authentication console

modem Dialin

modem autoconfigure discovery

rotary 1

terminal-type length

transport input all

autoselect during-login

autoselect ppp

line vty 0 4

exec-timeout 0 1

no exec

transport input none

transport output none

scheduler allocate 20000 1000

many thanks in advance

Hall of Fame Super Gold

Re: Cisco 2811 PVDM 32

Does "debug ppp neg" shows anything ?

New Member

Re: Cisco 2811 PVDM 32

ay 11 16:44:14.251: Se0/0/0:0 LCP: MagicNumber 0x6F205023 (0x05066F205023)

*May 11 16:44:14.251: Se0/0/0:0 LCP: PFC (0x0702)

*May 11 16:44:14.251: Se0/0/0:0 LCP: ACFC (0x0802)

*May 11 16:44:15.175: Se0/0/0:0 LCP: I CONFREJ [ACKsent] id 52 len 17

*May 11 16:44:15.175: Se0/0/0:0 LCP: MRRU 1524 (0x110405F4)

*May 11 16:44:15.175: Se0/0/0:0 LCP: EndpointDisc 1 ras001 (0x130901726173303031)

*May 11 16:44:15.175: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 53 len 10

*May 11 16:44:15.175: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:16.099: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 53 len 8

*May 11 16:44:16.099: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:16.099: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 54 len 10

*May 11 16:44:16.099: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:17.019: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 54 len 8

*May 11 16:44:17.019: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:17.019: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 55 len 10

*May 11 16:44:17.019: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:17.939: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 55 len 8

*May 11 16:44:17.939: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:17.939: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 56 len 10

*May 11 16:44:17.939: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:18.863: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 56 len 8

*May 11 16:44:18.863: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:18.863: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 57 len 10

*May 11 16:44:18.863: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:19.047 UTC: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to N/A N/A

*May 11 16:44:19.783: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 57 len 8

*May 11 16:44:19.783: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:19.783: Se0/0/0:0 LCP: O

New Member

Re: Cisco 2811 PVDM 32

followed by

CONFREQ [ACKsent] id 58 len 10

*May 11 16:44:19.783: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:20.703: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 58 len 8

*May 11 16:44:20.703: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:20.703: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 59 len 10

*May 11 16:44:20.703: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:21.623: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 59 len 8

*May 11 16:44:21.623: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:21.623: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 60 len 10

*May 11 16:44:21.627: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:22.547: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 60 len 8

*May 11 16:44:22.547: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:22.547: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 61 len 10

*May 11 16:44:22.547: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:23.467: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 61 len 8

*May 11 16:44:23.467: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:23.467: Se0/0/0:0 LCP: O CONFREQ [ACKsent] id 62 len 10

*May 11 16:44:23.467: Se0/0/0:0 LCP: MagicNumber 0x24583098 (0x050624583098)

*May 11 16:44:24.387: Se0/0/0:0 LCP: I CONFNAK [ACKsent] id 62 len 8

*May 11 16:44:24.387: Se0/0/0:0 LCP: AuthProto EAP (0x0304C227)

*May 11 16:44:24.387: Se0/0/0:0 LCP: Failed to negotiate with peer

*May 11 16:44:24.387: Se0/0/0:0 PPP: Sending Acct Event[Down] id[11]

*May 11 16:44:24.391: Se0/0/0:0 LCP: O TERMREQ [ACKsent] id 63 len 4

*May 11 16:44:24.391: Se0/0/0:0 PPP: Phase is TERMINATING

*May 11 16:44:25.307: Se0/0/0:0 LCP: I TERMACK [TERMsent] id 63 len 4

*May 11 16:44:25.311: Se0/0/0:0 LCP: State is Closed

*May 11 16:44:25.311: Se0/0/0:0 PPP: Phase is DOWN

*May 11 16:44:25.311: Se0/0/0:0 PPP: Phase is ESTABLISHING, Passive Open

*May 11 16:44:25.311: Se0/0/0:0 LCP: State is Listen

*May 11 16:44:25.311 UTC: %ISDN-6-DISCONNECT: Interface Serial0/0/0:0 disconnected from unknown , call lasted 12 seconds

*May 11 16:44:25.315: Se0/0/0:0 LCP: I TERMREQ [Listen] id 1 len 16 (0x6F205023003CCD74000002DE)

*May 11 16:44:25.319: Se0/0/0:0 LCP: O TERMACK [Listen] id 1 len 4

*May 11 16:44:25.507 UTC: %LINK-3-UPDOWN: Interface Serial0/0/0:0, changed state to down

*May 11 16:44:25.507: Se0/0/0:0 LCP: State is Closed

*May 11 16:44:25.507: Se0/0/0:0 PPP: Phase is DOWN

Hall of Fame Super Gold

Re: Cisco 2811 PVDM 32

You do not have "ppp authentication eap" in dialer like you do in group-async.

New Member

Re: Cisco 2811 PVDM 32

many thanks worked a treat. must be going blind staring at configs

Hall of Fame Super Gold

Re: Cisco 2811 PVDM 32

It's called configuration blindness, and it's very common among engineers.

Thanks for the nice rating, and good luck!

1082
Views
0
Helpful
8
Replies