Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 2821 with VWIC-2MFT-E1for dialin purposes Help

Hi All,

I'm working in a new project to configure a cisco 2821 with a VWIC2-2MFT-E1 interface card to work as a RAS server (Dial Backup). I will not use this card for voice purposes justo for data transmission.

I'm searching for a document like "how to" to configure this equipment, and I don't know if I have all necessary hardware to do this.

My IOS: c2800nm-ipvoicek9-mz.124-13a.bin

SHOW DIAG:

sh diag

Slot 0:

C2821 Motherboard with 2GE and integrated VPN Port adapter, 2 ports

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

PCB Serial Number : FOC11010EJC

Hardware Revision : 1.0

Top Assy. Part Number : 800-26921-02

Board Revision : A0

Deviation Number : 0

Fab Version : 03

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 87

Hardware date code : 20070106

Chassis Serial Number : FTX1103A3HA

Chassis MAC Address : 0019.3008.2900

MAC Address block size : 32

CLEI Code : COM3D00BRA

Product (FRU) Number : CISCO2821

Part Number : 73-8853-04

Version Identifier : V03

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF C1 8B 46 4F 43 31 31 30 31 30 45 4A 43 40

0x10: 03 E8 41 01 00 C0 46 03 20 00 69 29 02 42 41 30

0x20: 88 00 00 00 00 02 03 03 00 81 00 00 00 00 04 00

0x30: 09 87 83 01 32 3E DA C2 8B 46 54 58 31 31 30 33

0x40: 41 33 48 41 C3 06 00 19 30 08 29 00 43 00 20 C6

0x50: 8A 43 4F 4D 33 44 30 30 42 52 41 CB 8F 43 49 53

0x60: 43 4F 32 38 32 31 20 20 20 20 20 20 82 49 22 95

0x70: 04 89 56 30 33 20 D9 02 40 C1 FF FF FF FF FF FF

PVDM Slot 0:

32-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Hardware Revision : 4.0

Part Number : 73-8539-05

Board Revision : A0

Deviation Number : 0

Fab Version : 04

PCB Serial Number : FOC105234P5

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM2-32

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 EE 41 04 00 82 49 21 5B 05 42 41 30

0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 35 32

0x20: 33 34 50 35 03 00 81 00 00 00 00 04 00 09 00 CB

0x30: 88 50 56 44 4D 32 2D 33 32 89 56 30 31 20 D9 02

0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:

VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1

Hardware Revision : 0.0

Top Assy. Part Number : 800-22629-05

Board Revision : A0

Deviation Number : 0

Fab Version : 04

PCB Serial Number : FOC10412SU3

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : VWIC2-2MFT-T1/E1

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 FC 41 00 00 C0 46 03 20 00 58 65 05

0x10: 42 41 30 88 00 00 00 00 02 04 C1 8B 46 4F 43 31

0x20: 30 34 31 32 53 55 33 03 00 81 00 00 00 00 04 00

0x30: CB 90 56 57 49 43 32 2D 32 4D 46 54 2D 54 31 2F

0x40: 45 31 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Is anybody here has some experience and can help me with some information?

My best regards

Adriano

3 REPLIES
Silver

Re: Cisco 2821 with VWIC-2MFT-E1for dialin purposes Help

Hi, with the vwic card you can only use isdn pri signaling for voice connections, not for data. You can see it at the cco:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml

So for your purposes you'll need another equipment like a network module NM-1CE1T1-PRI

Regards

Hope this helps, if so pls rate post

Bronze

Re: Cisco 2821 with VWIC-2MFT-E1for dialin purposes Help

Actually, now you should be able to do data/DDR on VWICs as well, thanks to this new 12.4 feature :

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124limit/124x/124xc4/intserv.htm

Thanks and Regards,

~Zulfiqar

Community Member

Re: Cisco 2821 with VWIC-2MFT-E1for dialin purposes Help

Thanks all for the help,

In fact, I will use 2 E1's for this projetct from Telefonica.

I will verify all these information with my Cisco Partner here in Brazil.

Regards,

Adriano Porcaro

328
Views
0
Helpful
3
Replies
CreatePlease to create content