Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 2851 BRI configuration for dialin remote users

I have Cisco 2851 router with BRI port. I need assistance to configure it for remote dialin (modem) users. Pls assist.

1 REPLY
Cisco Employee

Re: Cisco 2851 BRI configuration for dialin remote users

If the remote users have analogue modems (v34bis or V90 for example), you will need a PVDM2-DM (Digital Modem) module to terminate the speech call that comes into the BRI port.

Refer here for details -

http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a00806b941f.html

you also need a VIC2-2BRI-NT/TE voice card to accept the analogue modem calls. The BRI WIC will only work with ISDN data calls - it not work with the digital modems.

228
Views
0
Helpful
1
Replies
CreatePlease to create content