Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco 800 series NAT - Port Fordwarding trouble

Dear,

I am having some problems with my cisco 800 series  router when i try to make  a Port Fordwarding.

I wonder if there are any special access list to  be programmed to enforce this.

Thank you very much for your attention.
5 REPLIES
Hall of Fame Super Gold

Re: Cisco 800 series NAT - Port Fordwarding trouble

You need to specify what command exactly you entered.

New Member

Re: Cisco 800 series NAT - Port Fordwarding trouble

I'm traying with:

access-list 1 permit 10.0.0.0 (My IP Range)

ip nat inside source static tcp 10.0.0.100 3200 interface Dialer1 3200

Regards,

Hall of Fame Super Gold

Re: Cisco 800 series NAT - Port Fordwarding trouble

That is fine, make sure you have ip nat ouside under Dialer1, and Ip NAT inside under internal If.ce

New Member

Re: Cisco 800 series NAT - Port Fordwarding trouble

Sorry,

I have IP nat inside but on my vlan interface to connect my ISP, what do yo mean with internal lf.ce?

Thanks,

Hall of Fame Super Gold

Re: Cisco 800 series NAT - Port Fordwarding trouble

Ip nat inside on inside interface, outside on the outside.

Kind of logic if you think about.

1862
Views
0
Helpful
5
Replies
CreatePlease to create content