Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cisco 831 Router to Configure VPN Access

Hello,

I need assistance in configuring a VPN in a Cisco 831 Router. I do not have any experience in configuring routers and VPN's, and would appreciate if any one could help out.

I would like to connect three Laptops to the Cisco 831 via Cisco VPN Client. Three laptops must have 10.42.6.x Address assigned by the router on the VPN Connection. They will also need access to the internal network which is 192.168.x.x private network. The Cisco has a Static IP on the Internal Interface and External Interface. I have tried several different ways of doing this, however I must be doing something wrong in my config.

Any help or suggestions would be appreciated.

2 REPLIES

Re: Cisco 831 Router to Configure VPN Access

Hi Robert

You can refer the below link in finding out the exact config to start with.

do make sure that your Cisco 831 box with the current IOS code installed in it supports the required feature to run the same..

http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html#anchor16

regds

Re: Cisco 831 Router to Configure VPN Access

Thanks for the link. I will give that a try and see what I can come up with.

830
Views
0
Helpful
2
Replies