Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco 851 with Sphairon 300HS (Deutsche Telekom) Vlan7 for PPPoE

Hello!

In Germany you can get VDSL from "Deutsche Telekom" with 50 Mbit/s bandwith.

You get a Speedport 300HS Modem, which seems to be a Sphairon (http://www.sphairon.com/fld7106/fld6750/presse_061024_pi_telekom_vdsl2.html).

This modem expects the pppoe-packets with a dot1q-vlan-id 7. does anyone know, how to configure this?

i found this one ->

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t5/feature/guide/dtppp_1q.html#wp1026380

but it seems to be only for outgoing connections.

Hardware: Cisco 851 wge

Software: 12.4-15T5

I tried to configure a sub-if, but i was not able to put the dial-pool-number command on this one.

(inter fa 4.7

encap dot1q 7

pppoe enable

! commands acceptet until here

pppoe-client dial-pool-number 1

! not accepted)

thanks in advance

3 REPLIES
Anonymous
N/A

Re: Cisco 851 with Sphairon 300HS (Deutsche Telekom) Vlan7 for P

You may try configuring a virtual private dialup network (VPDN) first which enables multiple clients to communicate through the router by way of a single IP address.

The following URL's may help you:

http://www.cisco.com/en/US/docs/routers/access/800/850/software/configuration/guide/pppoenat.html

http://www.cisco.com/en/US/docs/ios/lanswitch/configuration/guide/lsw_ieee_802.1q_ps6441_TSD_Products_Configuration_Guide_Chapter

New Member

Re: Cisco 851 with Sphairon 300HS (Deutsche Telekom) Vlan7 for P

the document in my posting aims on something with vpdn too. but i only found it for incoming connections to "my" router. but i need to dial out.

sorry, the second link is broken...

New Member

Re: Cisco 851 with Sphairon 300HS (Deutsche Telekom) Vlan7 for P

so if anybody encounters this problem, here is the solution:

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtvlansc.html

Steps:

1. enable

2. configure terminal

3. interface type number

4. vlan-id dot1q vlan-id

5. pppoe enable [group group-name]

490
Views
0
Helpful
3
Replies
CreatePlease login to create content