12-15-2008 12:00 AM
i have an public ip adres aaaa , then an adslmodem with inside adres c.c.c.138. the fa4 of the cisco is connected to it with ip cccc01.
can i make acces rules with public ip adresses on the outside lan ccc0 of my cisco router because he sees only the gateway ccc138.
should i pass the public ip adres to my cisco router through the adslmodem to make acces lists on basis of public ip adresses of hosts i want to allow ?
Solved! Go to Solution.
12-15-2008 06:59 AM
Generally, you'd want to put your ADSL modem in bridging mode. You'd then put your public IP addresses on your outside interface of the Cisco router, and you can control what traffic you want to enter your network via ACL, CBAC, etc.
HTH,
John
12-15-2008 06:59 AM
Generally, you'd want to put your ADSL modem in bridging mode. You'd then put your public IP addresses on your outside interface of the Cisco router, and you can control what traffic you want to enter your network via ACL, CBAC, etc.
HTH,
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide