I think it may be a firewall problem. I can ping the outside IP, and see it when I run a capture from any souce with IP traffic, going to the outside interface, but if I try to create an RA IPse connection, I don't see any traffic whatever hitting it.
From doing some research, I found that a firewall was blocking IPSec traffic. For testing purposes, I put it on our local LAN to rule out any firewall, and I was able to capture IPsec packets. I did not however, see any type of connectivity with this IPsec Ike v1 RA VPN. I'm doing authentication through AD, but I you would think that it should at least get me to the point where I can enter a login/pass.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.