Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco VPN

I am using the Cisco VPN Client. I can connect to the cisco device, username and password are correct. Everything works fine as far as connecting. The problem is when the VPN client is connected the pc can not access the Internet. If you disconnect the client everything works fine. When I run ipconfig there is a gateway for all connections except the vpn connection. Is there a setting I am missing in the router?

Thanks

3 REPLIES
Silver

Re: Cisco VPN

Did you configured split-tunneling, with this feature you can limit which domains is behind the VPN tunnel.

bye

FCS

Please rate me if I helped.

New Member

Re: Cisco VPN

Other users on the same domain can connect with no problem.

New Member

Re: Cisco VPN

Hey Mr. Brown

Please take a look at this document for split tunneling config on PIX fws. It does the job but read warnings of possible intrusion as well.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702992.shtml

122
Views
0
Helpful
3
Replies
CreatePlease to create content