CMTS uBR10012+RF-Switch N+1 Redundancy

[andre.ar]

Hello,

I need to know how to cabling a CMTS uBR10012 to a RF-Switch, when we are using four RF modules MC5X20S on the CMTS, to provide the 3+1 Redundancy.

There is only one document about RF-Switch Cabling, but it describes the cabling only for ONE RF module (http://www.cisco.com/en/US/tech/tk86/tk804/technologies_white_paper09186a00802cd675.shtml)

Please, everything about this issue is welcome.

Thanks.

[b.hsu]

What is the RFswitch type u r using?there are several RF switch types.If u r using uBR 3x10 RF switch, then I think the following link will provide you with a detailed sketch on cabling between this RF switch and the uBR10012 CMTS router.

http://www.cisco.com/en/US/products/hw/cable/ps2929/prod_quick_installation_guide09186a00801da7d5.html.

If this is not the RF switch model u use, then mention the name or model of ur RF switch type.Hence, I can provide u with a more appropriate document.

[rprado.soares]

Hello,

we are using modulo 5x20U-D (with MCX connectors) and the RF SW is exactaly uBR 3x10. We do have 4 interface cards (5x20U-D).

Thanks

Rafael