Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CMTS uBR10012+RF-Switch N+1 Redundancy

Hello,

I need to know how to cabling a CMTS uBR10012 to a RF-Switch, when we are using four RF modules MC5X20S on the CMTS, to provide the 3+1 Redundancy.

There is only one document about RF-Switch Cabling, but it describes the cabling only for ONE RF module (http://www.cisco.com/en/US/tech/tk86/tk804/technologies_white_paper09186a00802cd675.shtml)

Please, everything about this issue is welcome.

Thanks.

2 REPLIES
Silver

Re: CMTS uBR10012+RF-Switch N+1 Redundancy

What is the RFswitch type u r using?there are several RF switch types.If u r using uBR 3x10 RF switch, then I think the following link will provide you with a detailed sketch on cabling between this RF switch and the uBR10012 CMTS router.

http://www.cisco.com/en/US/products/hw/cable/ps2929/prod_quick_installation_guide09186a00801da7d5.html.

If this is not the RF switch model u use, then mention the name or model of ur RF switch type.Hence, I can provide u with a more appropriate document.

New Member

Re: CMTS uBR10012+RF-Switch N+1 Redundancy

Hello,

we are using modulo 5x20U-D (with MCX connectors) and the RF SW is exactaly uBR 3x10. We do have 4 interface cards (5x20U-D).

Thanks

Rafael

181
Views
0
Helpful
2
Replies