06-27-2006 05:54 AM
Can someone provide the ISDN DDR solution for configuring two BRI interface ( Bundled together - MPPP ) for achieving 256K bandwidth. I have two seperate ISDN lines and two BRI interfaces installed in the routers at both the point to point sites. The ISDN dialup shall be used as backup link.
06-27-2006 09:19 AM
look at this link it will help you:http://www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a00800a3b7a.shtml
remeber to rate this post if it helps
regards
Devang
06-29-2006 02:52 AM
Hi Devang,
I have already referred to the site provided by you. However, am concern if the dialer will dial the second dialer string after getting hooked to the first string. In order to achieve 256K bandwidth, the dialer have to dial both the strings.
Regds,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: