Configuration for bundling two BRI interface together
Can someone provide the ISDN DDR solution for configuring two BRI interface ( Bundled together - MPPP ) for achieving 256K bandwidth. I have two seperate ISDN lines and two BRI interfaces installed in the routers at both the point to point sites. The ISDN dialup shall be used as backup link.
Re: Configuration for bundling two BRI interface together
I have already referred to the site provided by you. However, am concern if the dialer will dial the second dialer string after getting hooked to the first string. In order to achieve 256K bandwidth, the dialer have to dial both the strings.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...