Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configure 2811 terminal server

alright,

first time i'm doing this...i've read some of the other posts and stepped through what i thought would be the config guide from cisco, but i guess i'm just not understanding...

During the step through, one of the steps is to configure line con 0 transport input all, but the only option for me is transport "output".  my line con config is as follows:

line con 0
session-timeout 20
no exec
transport preferred telnet
transport output all
line aux 0
line 0/3/0
transport input telnet
transport output telnet

I configured ip host switch1 2001 172.16.1.1

when i look at async 0/3/0, i see it is down / down

frankly, i'm not sure what i'm doing...i thought i would remote into the router, then telnet to the async interface...but, i'm not even sure how to do that even...ughghgh...

help...

thanks

bruce

  • Remote Access
4 REPLIES
New Member

Re: Configure 2811 terminal server

i should have mentioned, i'm using an HWIC 16A card on slot 0 subslot 3  with an Octal cable.

..

Silver

Re: Configure 2811 terminal server

Hi Bruce,

I'm pretty sure this post should help to get you on the right track.

https://supportforums.cisco.com/thread/2035867

The guy on that post just had a cabling problem the configuration is correct so you can try to replicate it (hope not violating copyrights hehe)

HTH

__ __

Pablo

Silver

Re: Configure 2811 terminal server

Hi Bruce,

I'm pretty sure this post should help to get you on the right track.

https://supportforums.cisco.com/thread/2035867

The guy on that post just had a cabling problem the configuration is correct so you can try to replicate it (hope not violating copyrights hehe)

HTH

__ __

Pablo

New Member

Re: Configure 2811 terminal server

7124
Views
0
Helpful
4
Replies
This widget could not be displayed.