11-27-2006 11:42 AM
Given the following show commands and config file. Why can't I surf the Internet through the LAN port on the Router?
Solved! Go to Solution.
11-27-2006 12:08 PM
I do not see an IP NAT OUTSIDE configured on any of your interfaces. I am guessing you are using Dialer 1 for your outside interface. You will need to add IP NAT OUTSIDE to it.
This link will help verify if NAT is working
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094c32.shtml
This will help configure NAT.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic13
I hope this helps.
11-27-2006 12:08 PM
I do not see an IP NAT OUTSIDE configured on any of your interfaces. I am guessing you are using Dialer 1 for your outside interface. You will need to add IP NAT OUTSIDE to it.
This link will help verify if NAT is working
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094c32.shtml
This will help configure NAT.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic13
I hope this helps.
11-30-2006 06:41 AM
hi rwyates,
i did what you told me.. but still (the Internet Account Works fine with the PC) but when I connect the Router and make the call and Log In, i cannot surf the web through the PC.
This is what a cybercafe configuration should have, there must be something wrong in there, anyone have a cybercafe configuration to look at? This is Internet Dial UP, not ISDN.
I post the config file and some troubleshooting commands..
Thanks...
11-30-2006 10:25 AM
you guys it worked!!
I was using the wrong DNS server from the ISP.
Thanks to all.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: