Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
PLC
Community Member

Console Server and PDU power control

Hello-

 

I am working on redesigning OOB access. Currently in our datacenters we have old routers setup as reverse telnet with analog line 20 nodes connected to the reverse telnet router. 

during a discussion it was mentioned that reverse telnet is a single point of failure.  I personally think any thing 

All you engineers out there if you can share some ideas or setup you have that is being used with today's technology and any vendor recommendations. we are looking at Port Authority and WTI. something that would include power modules so we dont have to replace the whole thing if something breaks with the power.

2 REPLIES
Bronze

Re: Console Server and PDU power control

I believe these Cisco PN's would suffice. 

 

Cisco ISR 4331 

Cisco NIM-24A

CAB-ASYNC-8

 

Cisco 4000 Interfaces and Modules

https://www.cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-isr/relevant-interfaces-and-modules.html#async-wan-interface

 

Installing the Cisco Asynchronous Serial NIM - 16/24 Port for Cisco 4000 Series ISRs
https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/Async-Serial-NIM-16-24-Port-xe-16-book.html

 

Please rate answers if helpful.

 

Thanks


Tim

PLC
Community Member

Re: Console Server and PDU power control

Thanks Tim. I am thinking more along the lines to have all datacenters OOB management centrally managed.

694
Views
0
Helpful
2
Replies
CreatePlease to create content