We have an AS/5300, running IOS version 12.2(2)XB12. By applying the command "clock summer-time PDT recurring 2 Sun Mar 2:00 1 Sun Nov 2:00", will it fix the Daylight Saving Time problem or do we need to apply the patch? Thanks.
I am not sure that I really understand what you are asking. But I believe that the answer is probably to use the show clock detail command. This will show what the source of time is (NTP or what) and if daylight savings has been enabled it will show what dates will be the start and end of daylight savings time. This works whether it is from the defaults in the code that you are running or from entering the optional parameters in the command.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...