Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dial to CISCO router

How can you dial to a CISCO router which is attached to a modem via its AUX port?

I want the detail configuration process.

Thank you in advance.

4 REPLIES
Hall of Fame Super Gold

Dial to CISCO router

You can find all what you "want" using the search box on cisco.com.

New Member

Dial to CISCO router

I couldn't find what I've been looking for.What I found from the "search" box shows only the physical connection between a router and the external modem.My question is exactly the following:-

Suppose you have a router at your office connected to a modem via its AUX port(which is afterall for a remote access purpose) and you sit at your house where you have some sort of internet connection (dial up or broadband it doesn't matter)

now you want to access the router(located at office) right from your home.

What is the configuration and the parameters you enter for the configuration (like IP addresses, username,pswd etc)

Hall of Fame Super Gold

Dial to CISCO router

It seems you're are mixing up things a little.

To access a router remotely from the internet, no aux port or modems is needed.

or

To access a router on the aux port with a modem, you need a dial-up modems.

Both these configurations are explained in the standard documentation, and easility done by any person with Cisco experience or certification. If you don't have that, I recommend you get one, to save yourself much loss of time.

2405
Views
0
Helpful
4
Replies