Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

dialup connection sporatically dials

I have two sites linked together via microwave with dialup as backup solution.  I have an IP SLA monitoring the main link and activates the dialup when the link goes down.

Well, my problem is that the SLA errorously sees the main link go down and kicks in the dialup.  BUT just for a few seconds and once it sees the main link up it, of course, drops the dialup.

On both ends, I have increase the timeout from 1000 to 10000 and changed the frequency to 51.  Hoping that prohibit the dialup.  But it hasn’t.

I have added the SLA config for your reference.

This is the far-end RTR

ip sla monitor 11

type echo protocol ipIcmpEcho 10.30.12.2

timeout 10000

threshold 4

frequency 51

ip sla monitor schedule 11 life forever start-time now

this is the central RTR

ip sla monitor 12

type echo protocol ipIcmpEcho 10.30.51.254

timeout 10000

threshold 4

frequency 51

ip sla monitor schedule 12 life forever start-time now

I think I need to change the SLA statement but I’m not sure. 

Thanks, Gary

2 REPLIES

Re: dialup connection sporatically dials

Hi Gary

Can you tell me what is the ip which you are monitoring using sla? (10.30.12.2 / 10.30.251.54).

Also can you post the output of show run/show log/show ip route here

regds

Community Member

Re: dialup connection sporatically dials

the far end is monitoring 10.30.12.2 and the central RTR is looking at 10.30.51.254

Goodland is the remote RTR

217
Views
0
Helpful
2
Replies
CreatePlease to create content