Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

DSL config

I did the basic configuration for ADSL on router 1802. When I issue show int atm0, it shows the following.

ATM0 is initializing, line protocol is down

Hardware is MPC ATMSAR (with Alcatel ADSL Module)

Even for one full day it shows as initializing only. It does'nt become UP.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: DSL config

it seems that you don't have a working dsl line (do you have checked this with another modem) or that you have the false router (Annex B [ADSL over ISDN] instead of Annex A [ISDN over POTS]) ...

Cisco 1801 is for Annex A (POTS)

Cisco 1802 is for Annex B (ISDN)

3 REPLIES

Re: DSL config

it seems that you don't have a working dsl line (do you have checked this with another modem) or that you have the false router (Annex B [ADSL over ISDN] instead of Annex A [ISDN over POTS]) ...

Cisco 1801 is for Annex A (POTS)

Cisco 1802 is for Annex B (ISDN)

New Member

Re: DSL config

The DSL is working with a 3rd party Router. Also the router is Cisco 1802, you can see the show version attached.

Hall of Fame Super Gold

Re: DSL config

Hi, as suggested abouve the 1802 can be the wrong model for you DSL line, for "normal" DSL you need the 1801.

175
Views
8
Helpful
3
Replies
CreatePlease to create content