Hello. My company has a dual cmts architecture. One cmts for internet traffic and the other is for VoIP. A problem we see is the cable modems on the Voice side will register with the internet cmts. Because they are not provisioned for voice, they get sent to a sub interface on the internet cmts that will route all the traffic to a null interface. This is fine, except when new ones come online and arent provisioned on the Voice cmts they will register with the internet cmts and accupy an address on the sub interface.
Does anyone have experience in a situation like this? If so, how can I tell the Cisco (Internet) cmts to ignore those cable modems?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...