Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Dynamic DNS DDNS and 851w problem.

I am trying to setup my 851 (C850-ADVSECURITYK9-M), Version 12.4(9)T7) with dynamic dns and I followed the cisco guide but for some reason "new pc" is being appended to my update. Instead of xxxx.homedns.org the router is updating newpc.xxxx.homedns.org. So it is updating the wrong entry, sorry if I am explaining this badly. My question is where is this "newpc" coming from? Here are my debug and configs. Thanks for the help!

Debug:

Aug 11 02:23:10.291: DYNDNSUPD: Adding DNS mapping for newpc.xxxxxxx.homedns.org <=> xx.xx.xx.xx

Aug 11 02:23:10.291: HTTPDNS: Update add called for newpc.xxxxxx.homedns.org <=> xx.xx.xx.xx

*Aug 11 02:23:10.291: HTTPDNSUPD: URL = 'ht tp://username:password@members.dyndns.org/nic/updatesystem=dyndns&hostname=xxxxxxx.homedns.org&myip=xx.xx.xx.xx/nic/updatesystem=dyndns&hostname=xxxxxxx.homedns.org&myip=xx.xx.xx.xx</A>'

*Aug 11 02:23:10.291: HTTPDNSUPD: Sending request

*Aug 11 02:23:10.383: HTTPDNSUPD: Response for update newpc.xxxxx.homedns.org <=> xx.xx.xx.xx

*Aug 11 02:23:10.383: HTTPDNSUPD: DATA START

*Aug 11 02:23:10.383: HTTPDNSUPD: DATA END, Status is Response data recieved, successfully

Config:

ip ddns update method sdm_ddns1

HTTP

add ht tp://username:password@members.dyndns.org/nic/updatesystem=dyndns&hostname=xxxxxx.homedns.org&myip/nic/updatesystem=dyndns&hostname=xxxxxx.homedns.org&myip< /A>=<a>

remove ht tp://username:password@members.dyndns.org/nic/updatesystem=dyndns&hostname=xxxxx.homedns.org&myip=< a>

!

interface FastEthernet4

description $ETH-WAN$

ip dhcp client update dns server none

ip ddns update sdm_ddns1

ip ddns update hostname xxxxx.homedns.org

ip address dhcp client-id FastEthernet4

ip nat outside

ip virtual-reassembly

ip tcp adjust-mss 1460

duplex auto

speed auto

no cdp enable

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Dynamic DNS DDNS and 851w problem.

try ...

ht*tp://USERNAME:PASSWORD@members.dyndns.org/nic/update?system=dyndns&hostname=&myip=<*a>

!!please ignore * !!

And “interval max 28 0 0 0" in the update method definition.

--

Regards,

Raul

(please rate helpful posts)

2 REPLIES
New Member

Re: Dynamic DNS DDNS and 851w problem.

try ...

ht*tp://USERNAME:PASSWORD@members.dyndns.org/nic/update?system=dyndns&hostname=&myip=<*a>

!!please ignore * !!

And “interval max 28 0 0 0" in the update method definition.

--

Regards,

Raul

(please rate helpful posts)

New Member

Re: Dynamic DNS DDNS and 851w problem.

Thanks for the help but even after the changes it still appends this "newpc" to my hostname.

So I did a DHCP debug to see what my ISP was setting and it looks like they are configuring my hostname as newpc.

*Aug 11 22:19:56.931: DHCP Ack Message

*Aug 11 22:19:56.931: DHCP: Lease Seconds: 900 Renewal secs: 450 Rebind secs: 787

*Aug 11 22:19:56.931: DHCP: Server ID Option: 172.31.15.248

*Aug 11 22:19:56.931: DHCP Host Name Option: newpc

reese_rtr(config-if)#

is there anyway to over ride this?

399
Views
0
Helpful
2
Replies