Re: EAP in ayncronos interface (Authetitication with certificate
It depends on what you are doing on the async interface. If there is a "dumb" terminal connected to it you will not be succesfull. The end host must have enough intelligence to handle the certificate. It will be possible if you are running ip over the link. (example: SLIP or ISP dial-up)
However: Authenticating and negotiating the certificate involves quite some traffic and hence I would not recommend using this option while many async lines will simply not offer sufficient reliability and bandwidth.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...