Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

Etherchannel issue

one of interfaces is suspended. total ports in the channel is 4. the other 3 are fine.

%EC-5-CANNOT_BUNDLE2: Gi0/24 is not compatible with Gi0/22 and will be suspended (speed of Gi0/24 is 100M, Gi0/22 is 1000M

under sh int status, the Gi0/24 is 100M. i havent hard code the speed and duplex on any ports so all port settings should be the same.

I hard code the speed to 1000M on gi0/24 but does not make any difference

1 REPLY

Re: Etherchannel issue

I think i have posted this under the wrong section.

will post under switching.......

162
Views
0
Helpful
1
Replies
CreatePlease to create content