I have situation where half of my network is connected with one central location and other half with second central location. Every router is connected with primary frame-relay link and ISDN as backup link (floating static route conf).
I need to configure that in case backup link can't manage to connect with one central location start connection with second central location. Failover ISDN backup link. Any sugestions? Thanks
Configure the two numbers under dialer interface. These will be tried in sequence, and in fact if things are configured properly it will be no problem if some branches are connected to primary hub and some to secondary.
I have diferent addressing on secondary location, but I think that this can be solved using another Dialer in remote offices and secondary IP address in central location. I will test soon this using mora one static route with bigger admin. distance in remote offices.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...