Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Far end block errors

Sir,

I am experiencing "Far end block errors Detected " on NM-2CE1B port. The port is being used for PRI.The controller remains UP but the calls get disconnected very frequently.

Can somebody guide where could be the problem ?

regds,

Aman

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Far end block errors

From my experience, it's always a Telco issue. It indicates there is a physical layer error on the far end of the circuit.

Here's what google picked up for FEBE.

http://www.auditmypc.com/acronym/FEBE.asp

Pls. rate all helpful posts.

HTH,

Sundar

2 REPLIES

Re: Far end block errors

From my experience, it's always a Telco issue. It indicates there is a physical layer error on the far end of the circuit.

Here's what google picked up for FEBE.

http://www.auditmypc.com/acronym/FEBE.asp

Pls. rate all helpful posts.

HTH,

Sundar

New Member

Re: Far end block errors

thanks a lot..

there was a pair problem at exchange end..

regds,

aman

326
Views
0
Helpful
2
Replies
CreatePlease login to create content