Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

fixed ip address for pptp client

I have configurated pptp server on Cisco router with following:

vpdn enable

vpdn-group 1

accept-dialin

protocol pptp

virtual-template 1

exit

ip local pool test 192.168.1.1 192.168.1.250

interface virtual-template 1

encapsulation ppp

peer default ip address pool test

peer default ip address pool test

ip address 192.168.1.1 255.255.255.0

no keepalive

ppp encrypt mppe auto

ppp authentication pap chap ms-chap

aaa authentication ppp default local

username testuser password 12345

!

But I need pptp client have fixed ip address.

Could anybody tell what to change?

1 REPLY

Re: fixed ip address for pptp client

You will either need a radius server to assign the ip adresses or you must make a separate pool containing a single ip address for each client. his means lots of configuration and will hence only be workable if you have few clients.

Regards,

Leo

896
Views
0
Helpful
1
Replies
CreatePlease to create content