Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

how to configure a 515 E

I just started working as NetAdmin. We have a private network, accessible from remote sites thru a 515 E PIX. Remote customers use Cisco VPN Client v 5.0 to access our net. They have a field in the Authentication Tab, named "Group Authentication", and there there is a field named "Name", let's say "user01".

My question is simple : what command must I use in the PIX to display any info related to this "user01" group name ? Or what file ? Or what manual must I read to understand how to relate VPN Client values to 515E PIX configuration ?

Thanks.

8 REPLIES
Hall of Fame Super Gold

Re: how to configure a 515 E

Beside start studying for your new job, you should also correct the misspelled company name in your profile.

New Member

Re: how to configure a 515 E

mr Paolo - let me say you are quite error prone.

a) I already have started to study, but this specific item, "IPSec group" is not clear documented, as far as I see. And I dont see any url or pointer in your note.

b) I did write the acronym of my company (just 3 letters) into my profile and someone from cisco (I supose) did expand it, including the error you saw. So, it is not me to blame - anyway I shall remove it.

Silver

Re: how to configure a 515 E

This is a very basic example.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008032cd24.shtml

This page provides many examples of setting up various VPN configurations. I have found it very helpful. I hope you do too.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/prod_configuration_examples_list.html

New Member

Re: how to configure a 515 E

Thanks a lot, Susan. The "basic" example has put me on the right lane : how to define the group "tennis". The large list of samples will be for my (not so) future stydy. Best luck.

Hall of Fame Super Gold

Re: how to configure a 515 E

Apologies to you then.

You will find Cisco products are generally very well documented and almost everything is found with the search box in the top right corner.

New Member

Re: how to configure a 515 E

Thank you very much, Paolo.

I do try to work hard, and sometimes just need a (small) light to get me out of the problem. A pointer to the "search" box is OK to me - I know lots of other places where it is useless.

Silver

Re: how to configure a 515 E

Please consider rating my post if it helped you resolve your problem. Thanks

New Member

Re: how to configure a 515 E

Sorry, Susan - I am not very used to this evaluation part of the forum. But now it's done. Best luck.

168
Views
4
Helpful
8
Replies