Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

pwl
New Member

How to configure Cisco 1841 to connect with Multitech GPRS modem

Dear All,

I am a beginner for Cisco. I would like to Set up Cisco 1841 to connect with Multitech GPRS modem MTCBA-G-F4 via AUX port.

Does anyone has an example of the configuration?

Regards,

Pawin

1 REPLY
Cisco Employee

Re: How to configure Cisco 1841 to connect with Multitech GPRS m

You would connect it to the AUX port like any modem.  The only difference could be that you dial a number provided by the wireless provider (using ATD instead of ATDT!) and set up any initial chat scripts to put in an appropriate initialization string.

Alternatively, it looks like you can set the modem up as a dedicated connection, in which case you can just set the async port to "async mode dedicated" provided that the modem was provisioned to have a permanent connection and act as a PPP Server.

I would be inclined to set ip up as a permanent connection instead of an on-demand one.  Much simpler process.

1185
Views
0
Helpful
1
Replies