How to configure cisco 804 router for ISDN users........

[m_aurangzeb]

On cisco AS5300 Access server i ve configured isdn users who connects using ISDN modem.

But my few users have purchased cisco 804 router(instead of ISDN modem) what configuration should i make on 804 router, without changing any configuration on AS5300 access server.

Pls reply me as soon as possible.

[nethelper]

Hello,

basically, your 804 router would be authenticated just as a regular ISDN user. Here is a sample configuration:

version 12.0

service timestamps debug datetime msec

service timestamps datetime msec

!

hostname R1

!

isdn switch-type

isdn leased-line BRI0 128

!

interface Ethernet0

ip address 10.0.0.1 255.0.0.0

no ip directed-broadcast

no ip mroute-cache

!

interface BRI0

ip unnumbered Ethernet0

no ip directed-broadcast

encapsulation ppp

compress stac

ppp authentication pap callin

ppp pap sent-username password

!

ip classless

ip route 0.0.0.0 0.0.0.0 BRI0

!

end

The username and password defined in the ´ppp pap sent-username´ statement must exist on the AS5300 in order for the 804 router to be properly authenticated.

So, think about the 804 just as a normal user...

If you run into trouble, post back here.

Regards,

Nethelper