Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

How to configure RADIUS to give IP address to a PPP client

I need to configure a RADIUS server, ACS if it's suported, to give a pre-defined IP address to a user connecting through PPP.

The NAS asks RADIUS for authentication then receives the accept or reject and some parameter that should tell the NAS the IP address the client will be assigned. (I guess it's this way)

Somebody knows which is this parameter and if it's this easy?

Thanks

1 REPLY
Silver

Re: How to configure RADIUS to give IP address to a PPP client

Yes it also works fine. You may try this also.

Before configuring the RADIUS NAS-IP-Address Attribute Configurability feature, you must have configured the RADIUS servers or server groups and AAA method lists. To configure the RADIUS NAS-IP-Address Attribute Configurability feature, perform the following steps.

SUMMARY STEPS

1. enable

2. configure terminal

3. radius-server attribute 4 ip-address

For further information click this link.

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_nas_ip_cfg_ps6350_TSD_Products_Configuration_Guide_Chapter

167
Views
0
Helpful
1
Replies
CreatePlease login to create content