How to disconnect a telnet session ?

[zaqtivi]

Router#show use

Line User Host(s) Idle Location

98 vty 0 idle 3d22h x.x.x.x

99 vty 1 idle 3d21h x.x.x.x

100 vty 2 idle 2d11h x.x.x.y

*101 vty 3 idle 00:00:00 x.x.x.z

Hi guys, I wanna disconnect telnet sessions 98, 99, and 100. How do I do it ? Thanks in advance.

[Jackong]

Richard,

by the way the other link is an upgrade only (Fa0/2/0) uses DHCP thru CMTS link with the same telco and then pass thru Tunnel 1 interface and no issue before.  when the telco change the media to MW thru Fa0/2/1 interface without using the tunnel 1 only by that time we encounter the issue.  It will be a problem disconnecting the link for a long time because we have 7 branches connected to that IPVPN.

Probably we can arrange the reboot option if we encounter again the issue and while I am negotiating with the vendor for purchasing of new device.

Regards,

Jason

[Richard Burts]

Jason

Thanks for explaining that the new link is an upgrade and that not using the new link is not a feasible option for you. In that case I would suggest that periodic reboot would be the option for you.

HTH

Rick