Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HWIC-4SHDSL

i have a question in this, as mentioned in the configuration guide for this HWIC , what is the meaning of : The number of routed interfaces for both the HWIC-4SHDSL and HWIC-2SHDSL is two.

6 REPLIES
Hall of Fame Super Gold

Re: HWIC-4SHDSL

You can split the interface in two DSL groups. So you can have multiple links between two routers, or a router connected to two more each one using one half.

New Member

Re: HWIC-4SHDSL

what about the 4 port RJ-11 that this HWIC can made, what i know is this HWIC can make one RJ-54 to 4 RJ-11 each can make a connection to a router, is that true?

Hall of Fame Super Gold

Re: HWIC-4SHDSL

Connector is a RJ-45, and as said above, you can connect to two routers.

It's all explained here:

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps7175/product_data_sheet0900aecd80581fa0.html

Please remember to rate useful posts.

New Member

Re: HWIC-4SHDSL

i know that the connector is RJ-45 but what i mean is if the HWIC-4SHDSL can provide only two routed connection so the HWIC-2SHDSL can do this also so what is the difference between both of them

Hall of Fame Super Gold

Re: HWIC-4SHDSL

Refer to table 1 of the document above and to the Q&A:

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps7175/prod_qas0900aecd80591ff1.html

I noticed you have not rated yet any posts. You should do that to show your appreciation to those helping you with useful answers.

Hall of Fame Super Gold

Re: HWIC-4SHDSL

I see that I've been rated "1" unfairly and without an explanation.

The person that left it should seriously review his attitude toward professionals, and the true reason of frustration when dealing with cisco matters.

407
Views
2
Helpful
6
Replies