Hi, I have a really weird isdn issue. My isdn serves as backup to the primary leased line. It is only activated when the leased line fails. However, recent tests have indicated that the isdn doesn't always work. It always dialls the same number. I have replaced the card, router, local rj45, tried dialling into a different number to no avail. The isdn does work intermittently (I have a working debug showing a good isdn call if you want). The debug from a failed ISDN is attached. Also, please note that at no stage do I loose connectivity to the local isdn switch.
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.6, timeout is 2 seconds:
.May 13 09:33:34 UTC: BR0 DDR: rotor dialout [best] least recent failure is also most recent failure
.May 13 09:33:34 UTC: BR0 DDR: rotor dialout [best] also has most recent failure
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...